Sales Hotline 1300 558 217

SL5210 4-Channel LED Signal Repeater

The 5210-45 Signal Repeater is used for boosting/repeating an RGBW signal when operating several RGBW fittings on the same network, or when controlling long runs of RGBW strips & modules. The Signal Repeater ensures the RGBW signal from the controller remains strong & consistent at all points within the installation. By using our Signal Repeaters in combination with any Superlight controller, there is virtually no limit to the length or number of fittings in the installation.

Specifications

Input Voltage:
Output Control Channels:
Max Power per Channel:
Total Maximum Power Output:
Dimming Control:
Controller Dimensions:
Connection Method:
Recommended Ambient Temperature:
IP Protection Rating:

12/24VDC
4 Channel
6A Per Channel
24A
0-100%
88x110x20mm
Phoenix Connector Block (removable)
-15 ~ +50°C
IP20

Typical Applications

Domestic, commercial LED lighting installations.
Expand capacity of existing RGB or RGBW controller
Synchronous control of RGB/RGBW LED installations
Compatible with Superlight constant voltage RGB/RGBW LED strips, modules & fittings

Lighting System Design

Superlight can provide detailed wiring schematics and lighting control system design by request. Contact us for more information.

Installation Guidelines

  • IP20 Indoor Use Only
  • Ensure rated load does not exceed 6A per channel (24A total)
  • Use only with approved Superlight 12/24VDC LED driver

Ordering Information

  • SL5210-45    Superlight 4 Channel LED Signal Repeater 12V/24VDC
led lighting catalogue 1

Request Catalogue