SL5210 4-Channel LED Signal Repeater

The 5210-45 Signal Repeater is used for boosting/repeating an RGBW signal when operating several RGBW fittings on the same network, or when controlling long runs of RGBW strips & modules. The Signal Repeater ensures the RGBW signal from the controller remains strong & consistent at all points within the installation. By using our Signal Repeaters in combination with any Superlight controller, there is virtually no limit to the length or number of fittings in the installation.


Input Voltage:12/24VDC
Output Control Channels:4 Channel
Max Power per Channel:6A Per Channel
Total Maximum Power Output:24A
Dimming Control:0-100%
Controller Dimensions:88x110x20mm
Connection Method:Phoenix Connector Block (removable)
Recommended Ambient Temperature:-15 ~ +50°C
IP Protection Rating:IP20

Typical Applications

Domestic, commercial LED lighting installations.
Expand capacity of existing RGB or RGBW controller
Synchronous control of RGB/RGBW LED installations
Compatible with Superlight constant voltage RGB/RGBW LED strips, modules & fittings

Lighting System Design

Superlight can provide detailed wiring schematics and lighting control system design by request. Contact us for more information.

Installation Guidelines

  • IP20 Indoor Use Only
  • Ensure rated load does not exceed 6A per channel (24A total)
  • Use only with approved Superlight 12/24VDC LED driver

Ordering Information

  • SL5210-45    Superlight 4 Channel LED Signal Repeater 12V/24VDC